Wedding Bunting: A DIY Tutorial

We teamed up with craft magazine Simply Sewing to give you a guide to making your own gorgeous, vintage inspired wedding bunting


Wedding DIY is a fun and creative way to keep costs down. If you’re feeling crafty and fancy having bunting at your wedding – it is the perfect vintage wedding essential – then you’re in the right place.

Bunting works at so many styles of wedding - whether you want a classic, vintage style day or you're planning a festival themed wedding with the perfect yurt wedding venue. We teamed up with the fabulous Simply Sewing magazine to bring you this amazing DIY wedding bunting tutorial. You’ll have fun, festive bunting for your wedding in no time at all.

DIY wedding bunting on display

You Will Need

  • Cotton fabric
  • Cotton tape: 2.5cm (1in) wide
  • Basic sewing kit
  • Template

Download the template


Use a 1cm (3/8in) seam allowance throughout
Use the template provided

Fabric Used

The team at Simply Sewing used ‘tana lawn’ fabric from Liberty. It is 137cm wide. However any pretty, floral fabric will add to your shabby chic décor, or use glittery material or bold colours for a more statement look.

Liberty floral fabric for wedding bunting

How to Make Your Own Wedding Bunting

Calculating the Fabric

Step One
You can use any fabric for your bunting that you like. We used a pretty cotton print. You’ll need 25x40cm (10x16in) for each flag.

Step Two
Decide how long you want your bunting to be. The finished flags are 15cm (6in) wide and we left a gap of 10cm (4in) between each one. So, if you divide the length you want you finished bunting to be by 25cm (10in) then that will give you the number of flags you need.

Step Three
Cut a length of cotton tape in a colour to coordinate with your fabric to the length of your finished bunting plus 30cm (12in) extra on each end for tying it up. The flags will be stitched to this.

Cutting Out

Step One
Trace round the bunting flag template and cut it out.

Step Two
Cut two pieces of fabric, each measuring 25x20cm (10x8in).

Template to cut out shapes for your wedding bunting

Step Three
Place the two pieces of fabric right sides (RS) together and pin the flag template centrally on top.

Template pinned to the wedding bunting fabric

Step Four
Cut round the template through both layers of fabric.

Step Five
Unpin then template then pin the two triangles of fabric together.

Triangle bunting shapes unpinned from the template

Stitching the Flags

Step One
Using a 1cm (3/8in) seam allowance, stitch the two fabric triangles together, down one top short edge, then down the side, up the other side and up the other short straight edge.

Step Two
Leave the top open and remember to reverse stitch at the beginning and end of your stitching to secure.

Secured stitching on the wedding bunting

Trimming the Seams

Step One
Trim the seams to reduce the fabric bulk at the bottom point of the fabric. This will help the flag lie flatter and have a sharper point once it’s turned RS out.

Step Two
Snip the bottom point of fabric off about 2mm (1/16in) below the stitching but take care not to cut the stitches. Taper the fabric edge to this point so there is less fabric outside the seams on both sides.

Wedding bunting with the inside shape trimmed

Finishing the Flags

Step One
Turn the triangles RS out and press so that the seams lie right on the edges. Lightly press with an iron. The short straight sides at the top of each side allow the flag to lie more neatly within the cotton tape when you assemble the bunting so make sure you press these neatly into place too.

Wedding bunting triangles turned inside out

Step Two
Make as many flags as you need in exactly the same way.

Triangles of wedding bunting fabric grouped together

Pinning the Flags in Place

Step One
Fold the cotton tape in half lengthways with the wrong sides (WS) together and press all along the length to make a neat crease down the centre.

Step Two
With the folded edge of the tape at the top, measure 30cm (12in) (or from the left side) and mark with a pin.

Step Three
Unfold the tape then place one stitched flag on top of it so that the top of the flag meets with the fold. Fold the tape back down on top and pin into place.

Step Four
Measure 10cm (4in) from the right top edge of the pinned flag along the tape and mark with a pin. Pin the next flag inside the folded tape in exactly the same way.

Step Five
Repeat this to pin all your flags along the length of tape.

Triangle bunting shapes pinned to the strip

Step Six
Turn both short ends of the cotton tape under by 1cm (3/8in) to the inside of the folded tape and pin.

Stitching the Bunting

Step One
Starting at one end of the cotton tape, stitch along your binding, 2mm (1/16in) from the tape edge making sure you stitch through both the front and back of the binding and through the flags too.

Bunting triangles stitched to the fabric strip

The stitching should go through the flags and through the tape between them to keep the tape folded and hold the flags securely.

Completed wedding bunting stitched to the fabric strip

If you loved making your own bunting and want more crafting ideas, make sure you check out Simply Sewing – hitched users can enjoy a free gift when they subscribe – there’s inspiration and guides to help you DIY so much – from bridesmaid dresses to decorations and gifts.

Simply sewing magazine cover

Those that want more DIY tutorials right now, don’t miss our guide to making your own floral crown, or watch our round up of DIY wedding makeup tutorials for all skin tones.


You Might Also Like:

Tagged in

Latest Articles

More Wedding Articles